User's Manual

PRODUCT MANUAL DEKO4078SD MULTI-CHANNEL SIGNAL BOOSTER DEKOLINK WIRELESS LTD.

Page 64 Proprietary Data P/N 300SC30031 Rev. 1.2

CONFIGURING THE CHANNELS

This section describes how to configure the channels for the 700 and 800 bands. The

application enables defining up to a total of 24 channels (displayed in groups of 6)

for both the 700 and 800 bands. The channel configuration consists of selecting the

required channels for each band and defining their filters (the same family of filters

must be selected for each group of channels). The available channels and required

filters are accessed from the 700 and 800 Window tabs.

To configure the required channels

1. Enable the required channels (up to 24 for both bands) in the Filter Enable

On/Off column of each of the 700 and 800 band windows.

Note: The channels are displayed in groups of six.

2. Determine the Center Frequency Input. The displayed

Center Frequency

Output

will be similar to the displayed input.

3. Click CTRL+ A (to enter

Advanced

mode) and select the required filter type in

the Filter Description Type column.

Array of up

to 24

confi

urable

channels