User's Manual

APPENDIX C: CONFIGURATION AND
MANAGEMENT USING DDF APPLICATION
This appendix provides the initialization and setup procedures for the Deko4078SD
signal booster. The procedures are performed through an Ethernet connection
between the Deko4078SD signal booster and a computer running the Management
Tool supplied with your Setup CD.
The commissioning procedure consists of opening a Deko4078SD Management Tool
session and configuring the signal booster general parameters and required filters for
the 700 MHz and 800 MHz bands.
COMMISSIONING THE SIGNAL BOOSTER
INSTALLING THE DMSB MANAGEMENT TOOL ON THE COMPUTER
To install the Deko4078SD signal booster Management Tool on your
Computer
1. Run the Dekolink CD and double click the RMS650_Setup_ddmmyy.exe
(where
ddmmyy is day/month/year in double digits) file to install the
Deko4078SD Management Tool SW. The following Install Command dialog
appears.
Figure 25. Install Command Dialog
2. Click Install.
3. Double click the RMS650ddf.exe file from the Dekolink CD to run the program.
4. Once the program is installed, drag the c-RMS650ddf SW icon onto the
desktop from the location:
c:\\program_files\dekolink\rms650\RMS650DDF
The SW installation is now complete.