User's Manual

PRODUCT MANUAL DEKO4078SD MULTI-CHANNEL SIGNAL BOOSTER DEKOLINK WIRELESS LTD.
Page 54 Proprietary Data P/N 300SC30031 Rev. 1.2
3. From the User's Pane, click Del. An authorization message dialog box is
displayed.
4. Click Yes. The User’s name is removed from the list.
7.2 CONFIGURATION, BACKUP AND RESTORE
The application enables performing the following backup and restore operations via
the Backup/Restore dialog:
• Backing up the current configuration
• Restoring any previously saved configuration to the booster
• Restoring the booster’s factory default setup
• Restoring a configuration file from a user defined location
NOTE: The configuration backup and restore files are stored in the Deko-CMU.
This section describes the Backup/Restore dialog and how to perform the backup,
restore and upload operations.
7.2.1 THE CONFIGURATION BACKUP WINDOW
To access the configuration backup window:
1. From the Tree Pane, select the Booster and click the Backup/Restore button.
2. The Backup/Restore pane appears. The pane lists the currently backed up files
and provides backup and restore options.
The files are listed along with identifying information and the time of the backup.
Files of user defined configurations are
BLUE .
The default factory settings file is BLACK and is named DEKO4078_System .csv.
7.2.2 SW UPGRADE
The SW upgrade procedure must be performed for each individual Booster module:
UD Uplink; UD Downlink; DDF Uplink; DDF Downlink.
NOTE: During the upgrade, the Booster is disconnected from the network.
CAUTION
DO NOT TURN OFF THE BOOSTER DURING THE UPLOAD PROCESS!!!
View the current SW version in the System-Info sub-tab of the Administration tab
(see
6.9).
To perform the software upgrade procedure
1. Select the Administration tab SW Upgrade sub-tab. The following window
appears.