User's Manual

PRODUCT MANUAL DEKO4078SD MULTI-CHANNEL SIGNAL BOOSTER DEKOLINK WIRELESS LTD.
Page 50 Proprietary Data P/N 300SC30031 Rev. 1.2
6.8 SLIDING WINDOW CONFIGURATION
Use the Input Window field area in the Advanced-Installation sub-tab to set the
acknowledgment delay period (Sliding Window).
To set the sliding window options
1. Click the Settings tab and then click the Advanced-Installation sub-tab. The
following screen appears.
2. Define the following parameters:
• Attack Time (µsec) - Time between the instant the signal exceeds the
activation threshold and the units’ reaction (default is 10µsec). The Attack Time
range is between 10-50µsec. In addition, define the Attack Steps (0-31dB).
• Release Time (sec) - Interval between the time the signal is disabled until it is
continued (default is 1sec). The Release Time range is between1-60sec. In
addition, define the Release Steps (0-31dB).
3. Click Send.
6.9 VIEWING SYSTEM INFORMATION
Refer to the System Info sub-tab of the Administration tab to view the signal
booster general information. The following properties are displayed:
• System SW version
• Main drawer part number
• P.Amp drawer part number
• Power Supply part number
• UD DL SN – Up-Down Downlink Serial Number