User's Manual

PRODUCT MANUAL DEKO4078SD MULTI-CHANNEL SIGNAL BOOSTER DEKOLINK WIRELESS LTD.
Page 44 Proprietary Data P/N 300SC30031 Rev. 1.2
6.3 MODIFYING DEKO4078SD PARAMETERS
To modify the signal booster parameters
1. Click the General sub-tab of the Settings tab. The following appears.
2. Perform the required changes in the displayed parameters (see field descriptions
in section
5.3.1).
Note: Upon selecting a different downlink routing option, the previous filter map is
deleted and a new one must be configured (see 4.2.3 and/or 6.1.1).
3. Click Send.
6.4 VIEWING ONLINE BOOSTER PARAMETERS
To view current signal booster Parameters
After a connection has been established between the computer and the signal
booster click the Refresh button, located at the bottom of the
Settings window
shown below.