User's Manual

PRODUCT MANUAL DEKO4078SD MULTI-CHANNEL SIGNAL BOOSTER DEKOLINK WIRELESS LTD.
Page 42 Proprietary Data P/N 300SC30031 Rev. 1.2
6.1.3 DELETING FILTERS
To delete a configured filter from the list
1. Click the Filters tab of the Settings window. The following appears:
2. In the Select column, select the filter to be deleted.
3. Click the Delete Filter button. The filter table will be updated and displayed
with the new list of available filters.
6.2 GENERATING ID TONE ON CHANNELS
The ID tone is used for the “Walk Test” and enables the Deko4078SD signal booster
to generate a specific tone in order to check the communication during setup. The ID
Tone option is accessed through the
Routing tab of the DDF window. See following
figure.
ID Tone
Delete Filter