User's Manual

PRODUCT MANUAL DEKO4078SD MULTI-CHANNEL SIGNAL BOOSTER DEKOLINK WIRELESS LTD.
P/N 300SC30031 Rev. 1.2 Proprietary Data Page 41
Note: The remaining filter parameters and attributes are displayed with default values
that can be modified according to site requirements.
6. The default filter Max Gain value displayed is the Maximum Gain calculated
according to the isolation settings (see section
4.2.1 step 2). This value can be
modified, however the filter Maximum Gain cannot be higher than that calculated
according to the booster isolation settings. If a higher maximum gain value is
required the isolation settings must be modified accordingly.
7. Click Apply.
6.1.2 EDITING FILTERS
To edit a filter
1. Click on the Filters tab of the Settings window. The following appears:
2. In the Select column, select the filter to be edited.
3. Click the Add/Edit Filter or Next button. The following window appears:
4. Modify the required parameters and click Apply. The previous filter screen
appears.