User's Manual

6 DMSB MT OPERATIONS

6.1 F

ILTERS

The application enables the user to add, edit and delete filters. See following sections

for descriptions.

6.1.1 ADDING A FILTER

To add a filter

1. Click on the Filters tab of the

Settings

window. The following window appears:

Note: Upon initial setup there are no filters listed.

2. Verify that no existing filters are selected and click on the Add/Edit Filter

button. The following window appears.

3. Select the required filter type in the Filter Type field.

Note: Filter types are taken from the list of available filter types.

4. Define the DL center frequency in the Frequency field.

5. Define the RSSI threshold range in the Signal Gate Threshold Low/High

fields.

Add/Edi

Filte