User Manual
Table Of Contents
- INTRODUCTION
- FUNCTIONAL DESCRIPTION
- DESCRIPTION
- INSTALLATION
- REPEATER MANAGEMENT TOOL (RMT)
- OPERATION
- MAINTENANCE AND TROUBLESHOOTING
- APPENDIX A: MECHANICAL OUTLINE
- APPENDIX B: ALARMS AND LEDS
- APPENDIX C: INSTALLING THE REPEATER IN A LABORATORY SETTING
- APPENDIX D: MODEM INSTALLATION (OPTION)
- APPENDIX E: DEKOLINK WIRELESS LIMITED WARRANTY
DEKOLINK WIRELESS LTD. PRODUCT MANUAL DIGITAL REPEATER
G
LOSSARY
The following is a list of abbreviations and terms used throughout this document.
Abbreviation/Term Definition
AGC
Automatic Gain Control
ALC
Automatic Level Control
ATR
Acceptance Test Report
DAS
Distributed Antenna System
DDF
Dekolink Digital Filter
DL
Dwnlink
Downlink
The path covered from the Base Transceiver
Station (BTS) to the subscribers/service area
via the repeater
ESD
Electro-Static Discharge
iDEN
Integrated Digital Enhanced Network
IF
Intermediate Frequency
IP3
Third order Intercept Point
MN
Model Number
NMT
Network Management Tool
PLL
Phased Locked Loop
POTS
Plain Old Telephone System
RF
Radio Frequency
RMT
Repeater Management Tool
SALC
Smart-ALC (Automatic Level Control)
SIM
Subscriber Identification Module
SQE
Signal Quality Estimate
UL
Uplink
Uplink
The path covered from the subscribers/service
area to the Base Transceiver Station (BTS)
via the repeater
VSWR
Voltage Standing Wave Ratio
Page d Proprietary Data Pub. 302-2004 Rev. 2.0