User Manual

Table Of Contents
DIGITAL REPEATER PRODUCT MANUAL DEKOLINK WIRELESS LTD.
Indication Probable Cause Recommended Action
Reboot the Repeater.
Restart the PC.
Re-install the Controller
software *
Connection with
the Repeater failed
in the remote
connection
Communication
failure
Check that the modem is
physically connected to the
controller serial input.
Verify that the modem local
port baud rate is 57,600 bps.
Verify that the Controller LED
is blinking.
Verify that the modem is
connected to the antenna cable
via the RF coupler.
Restart the PC.
Reinstall the Controller
software.
(*) If the indication remains after the On/Off procedure, replace the Repeater.
Page 26 Proprietary Data Pub. 302-2004 Rev. 2.0