User Manual
Table Of Contents
- INTRODUCTION
- FUNCTIONAL DESCRIPTION
- DESCRIPTION
- INSTALLATION
- REPEATER MANAGEMENT TOOL (RMT)
- OPERATION
- MAINTENANCE AND TROUBLESHOOTING
- APPENDIX A: MECHANICAL OUTLINE
- APPENDIX B: ALARMS AND LEDS
- APPENDIX C: INSTALLING THE REPEATER IN A LABORATORY SETTING
- APPENDIX D: MODEM INSTALLATION (OPTION)
- APPENDIX E: DEKOLINK WIRELESS LIMITED WARRANTY
DEKOLINK WIRELESS LTD. PRODUCT MANUAL DIGITAL REPEATER
5.3 REMOTE CONNECTION
To set up a remote connection:
Note
The remote connection is performed to a PC.
1. Connect a modem to the PC serial COM port
2. Set the Baud rate to 57,600 bps with the RMT software (Refer to
the RMT User's Guide for more information.)
Figure 7: Digital Repeater - Remote Monitoring and Control Connection Diagram
See Appendix D: Modem Installation for further installation procedures.
Pub. 302-2004 Rev. 2.0 Proprietary Data Page 19