User Manual
Table Of Contents
- INTRODUCTION
- FUNCTIONAL DESCRIPTION
- DESCRIPTION
- INSTALLATION
- REPEATER MANAGEMENT TOOL (RMT)
- OPERATION
- MAINTENANCE AND TROUBLESHOOTING
- APPENDIX A: MECHANICAL OUTLINE
- APPENDIX B: ALARMS AND LEDS
- APPENDIX C: INSTALLING THE REPEATER IN A LABORATORY SETTING
- APPENDIX D: MODEM INSTALLATION (OPTION)
- APPENDIX E: DEKOLINK WIRELESS LIMITED WARRANTY
DIGITAL REPEATER PRODUCT MANUAL DEKOLINK WIRELESS LTD.
5. REPEATER MANAGEMENT TOOL (RMT)
5.1 GENERAL
The Repeater Management Tool (RMT) software supplied with the Digital Repeater
provides full access to all control settings and monitoring capabilities. The RMT
software can be installed on Windows 95, Windows 98, Windows 2000, and
Windows XP operating systems.
RMT is used to manage, monitor and control the repeater locally via a serial
connection or remotely through a modem. See the RMT User's Guide for more
information.
The RMT allows either a local or remote connection for control of the Repeater.
5.2 LOCAL CONNECTION
To set up a local connection:
Turn on the Repeater and wait for the power LED on the Control Box in the
Digital Repeater to begin flashing rapidly.
•
•
•
Connect an external serial cable from an external PC (COM interface) to the
Control Box.
Set the Baud rate to 57,600 bps with the RMT software program. (Refer to
the RMT User's Guide for more information.)
Figure 6: Digital Repeater - Local Monitoring with Laptop
Page 18 Proprietary Data Pub. 302-2004 Rev. 2.0