User Manual

DIGITAL REPEATER PRODUCT MANUAL DEKOLINK WIRELESS LTD.
4. INSTALLATION
4.1 SAFETY INSTRUCTIONS
Before installing the repeater, review the following safety information:
Follow all local safety regulations when installing the repeaters. •
•
•
•
•
•
•
•
•
•
Only qualified personnel are authorized to install and maintain the repeater.
When operating the repeater, it is recommended to keep its cover closed while the
power is on. Some maintenance tasks may require the repeater door to be opened
while the power is on. In such cases, perform the required tasks carefully and
remember to close the repeater cover/door when finished.
Ground the repeater with the grounding bolt located on the outside of the
cabinet.
Do not use the grounding bolt to connect external devices.
Use a suitable mounting surface, such as a rigid wall.
Follow Electro-Static Discharge (ESD) precautions.
Before closing the repeater cover, make sure no wires are in the way.
Install the repeater close to the service area to maintain the output power
and noise figure.
Use low loss cables to connect the antennas to the repeater.
Install the repeater in a shielded, ventilated, and easy-to-reach area.
4.2 MECHANICAL INSTALLATION
The detailed mechanical instructions for the Digital Repeater are provided in the
following publication:
Dekolink Digital Repeater – Deployment and Installation Manual.
Please refer to this document.
Page 14 Proprietary Data Pub. 302-2004 Rev. 2.0