User Manual
Table Of Contents
- INTRODUCTION
- FUNCTIONAL DESCRIPTION
- DESCRIPTION
- INSTALLATION
- REPEATER MANAGEMENT TOOL (RMT)
- OPERATION
- MAINTENANCE AND TROUBLESHOOTING
- APPENDIX A: MECHANICAL OUTLINE
- APPENDIX B: ALARMS AND LEDS
- APPENDIX C: INSTALLING THE REPEATER IN A LABORATORY SETTING
- APPENDIX D: MODEM INSTALLATION (OPTION)
- APPENDIX E: DEKOLINK WIRELESS LIMITED WARRANTY
DEKOLINK WIRELESS LTD. PRODUCT MANUAL DIGITAL REPEATER
3.4.3 Mechanical Specifications
The following table provides the mechanical specifications of the Digital Repeater.
Element Value
Size H x W x D 600 x 400 x 300 mm (23.6 x 16 x 12 inch)
Weight Approximately 42 kg. (92.4 lbs.)
3.4.4 Connectors
The Repeater interfaces with a Base antenna port and a Mobile antenna port. It
includes four external connectors in its bottom panel, as described below.
Connector Type
RF Connectors:
BASE / MOBILE
N-type, Female
AC Circular, 3-pin
Alarms Circular, 8-pin
3.4.5 Environmental Specifications
Dekolink’s Digital Repeaters meet the European IP65 and American NEMA4
weatherproof standards. The Repeater is designed to operate properly under the
following environmental conditions.
Condition Value
Operating temperature
- 30° C to + 50°C
Storage temperature
- 50° C to + 80°C
Pub. 302-2004 Rev. 2.0 Proprietary Data Page 13