User Manual
Table Of Contents
- INTRODUCTION
- FUNCTIONAL DESCRIPTION
- DESCRIPTION
- INSTALLATION
- REPEATER MANAGEMENT TOOL (RMT)
- OPERATION
- MAINTENANCE AND TROUBLESHOOTING
- APPENDIX A: MECHANICAL OUTLINE
- APPENDIX B: ALARMS AND LEDS
- APPENDIX C: INSTALLING THE REPEATER IN A LABORATORY SETTING
- APPENDIX D: MODEM INSTALLATION (OPTION)
- APPENDIX E: DEKOLINK WIRELESS LIMITED WARRANTY
DEKOLINK WIRELESS LTD. PRODUCT MANUAL DIGITAL REPEATER
After filtration, the digital signals are converted back into analog signals and
up-converted to RF signals by the Up-Converter.
The output RF signal is then amplified by a High Power Amplifier, and combined by
a duplexer before output.
The output signal is emitted by the antennas, either towards the BTS in case of a
signal from the mobile handset, or to the Outdoor antenna or to the Indoor antennas
array, in accordance with the application.
Pub. 302-2004 Rev. 2.0 Proprietary Data Page 5