User Manual

DIGITAL REPEATER PRODUCT MANUAL DEKOLINK WIRELESS LTD.
High spectral purity •
•
•
Local and remote monitor and control (software enabled)
Relatively small dimensions
1.4 MODELS AND FREQUENCIES
Dekolink’s Digital Repeater can be provided in several models, as listed below.
The operating frequency ranges depend on the type and model, as specified in the
following table.
Repeater Type Model Number Downlink
(MHz)
Uplink
(MHz)
iDEN / SMR / LMR 800 MW-DBDA-SMR-50W85 851-866 806-821
iDEN / SMR 900 MW-DBDA-SMR-50W90-PS9 935-941 896-902
Public-safety MW-DBDA-SMR-50W90-PS8 851-869 806-824
NPSPAC MW-DBDA-SMR-50W90-
NPSPAC
866-869 821-824
2 Way Paging MW-DBDA-SMR-50W90-2PG 928-941 896-902
1.5 UNPACKING AND INSPECTION
This section provides information for unpacking, inspection and preparation for
installation.
Examine the shipping container for damage before unpacking the unit. Perform a
visual inspection to reveal any physical damage to the equipment.
Verify that the equipment is complete, as listed below and under a packing slip.
Contact Dekolink Wireless Ltd if any of this equipment is missing.
Your Dekolink Digital Repeater comes with the following equipment:
Digital Repeater •
•
•
•
•
•
•
•
•
Key (used to lock the repeater case)
AC cable [6 ft.]
Alarm cable [6 ft.]
RS232 cable [6 ft.]
RMT Software Installation CD
RMT Software User's Guide and Digital Repeater Hardware Manual (CD
and hardcopies)
Acceptance Test Report (A.T.R.)
Packaging Box
Page 2 Proprietary Data Pub. 302-2004 Rev. 2.0