Installation Manual

DEKOLINK WIRELESS LTD. PRODUCT MANUAL IDEN REPEATER
1. INTRODUCTION
1.1 GENERAL
Dekolink’s CDMA Repeaters are frequency range selective amplifiers that amplify
signals bi-directionally between mobile phones and base stations, in cellular and other
wireless mobile telephone systems. The CDMA Repeaters can be monitored locally
or remotely via Dekolink’s Windows-based Network Management System - RMT
software (Refer to the RMT Software User's Guide for more information).
1.2 APPLICATIONS
Dekolink’s CDMA Repeaters help solve area coverage problems:
Extended coverage for rural and isolated areas •
•
•
•
•
•
•
•
•
•
Improved in-building coverage
Hole filler application whenever there is no coverage of a particular spot in
the cell site (due to terrain topography or urban structures that shadow areas)
Cell extension to improve the coverage of an existing cell
1.3 FEATURES
Some of the Dekolink CDMA Repeaters' features are listed below:
4W composite output power
90 dB RF gain
Flexible, software controlled, bandpass filter center frequency (for partial
bandwidth models)
High spectral purity
Local and remote monitor and control (software enabled)
Relatively small dimensions
1.4 MODELS AND FREQUENCIES
Dekolink’s CDMA Repeater can be provided in several models, as per customer
requirements. The frequency range is defined as follows:
Repeater
Type
Model Number Downlink
(MHz)
Uplink
(MHz)
CDMA Fixed
Frequency
Range
MW-CSR-800AB-25W90-XXX-YY Series
where:
(1) XXX =Uplink Low Frequency (MHz)
(2) YY = Bandwidth
869 – 894 824 – 849
CDMA
Variable Center
Frequency
MW-CSR-800AB-25W90-YY Series where:
(1) YY = Frequency Range Bandwidth
869 – 894 824 – 849
Pub. 311-2005 Rev. 1.0 Proprietary Data Page 1