Installation Manual

IDEN REPEATER PRODUCT MANUAL DEKOLINK WIRELESS LTD.
5.5 REPEATER INITIALIZATION PROCEDURES
To initialize and setup the CDMA Repeater parameters, proceed as follows:
3. Turn on the Laptop or the PC (for remote configuration)
4. Activate the RMT from the Start menu or by double clicking the Repeater
Management icon on your desktop
1. The following startup screen is displayed.
2. Click on the Temp Unit button as follows. Make sure that the “Repeater PN"
is correct (Please refer to the RMT User's manual to set the required PN).
3. Click on the Connect button as follows.
Page 20 Proprietary Data Pub. 311-2005 Rev. 1.0