Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-9180-190 e-mail: marketing@decolink.com web www.decolink.com INSTALLATION AND OPERATING INSTRUCTIONS FOR MW-CBDA-PCS-X-1W65-A CELLULAR BI-DIRECTIONAL AMPLIFIER TABLE OF CONTENTS Page 1 of 9 CBDA PCSX 1W65 Install.
Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-9180-190 e-mail: marketing@decolink.com web www.decolink.
Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-9180-190 e-mail: marketing@decolink.com web www.decolink.com BDA OVERVIEW: The Bi-Directional Amplifier (BDA) assembly provides an exceptional repeater/booster performances to extend the coverage area of radio communications in buildings and RF shielded environments. Features such as high linearity power amplifiers are contributing for the overall improved system linearity performances.
Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-9180-190 e-mail: marketing@decolink.com web www.decolink.com MGC AGC RF AMPLIFIER DETECTER AGC CIRCUIT TO BASE STATION ANTENNA COUPLER Duplexer Downlink Duplexer DETECTER (N-TYPE) AGC CIRCUIT (N-TYPE) TO AREA ANTENNA MGC COUPLER Uplink AGC RF AMPLIFIER BDA with AGC & MGC RF BLOCK DIAGRAM BDA OPERATION The RF connection is made via two type “N” female connectors.
Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-9180-190 e-mail: marketing@decolink.com web www.decolink.com AGC & MGC FUNCTION The BDA has AGC function. Their amplifier has a directional coupler and a detector at the output of the high power amplifier to monitor the output power.
Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-9180-190 e-mail: marketing@decolink.com web www.decolink.com RF EXPOSURE WARNING In order to satisfy the FCC RF exposure requirements, you must ensure that the installation complies with the following: One antenna is connected via cable that has typical 1~10 dB attenuation (depends on the length of the cable) to the BDA BASE port.
Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-9180-190 e-mail: marketing@decolink.com web www.decolink.
Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-9180-190 e-mail: marketing@decolink.com web www.decolink.com ENVIRONMENTAL CONDITIONS: The unit is designed for indoor applications: Operating temperature : - 30°C to + 50°C : - 50°C to + 80°C Storage temperature MECHANICAL SPECIFICATIONS: Size : 10 x 10 x 5 inch approx. (250 x 250 x 120 mm approx.) RF Connectors : N-type Female Weight : 15 Lbs. (7 kg.) approx.
Dekolink WIRELESS Ltd. 16 Bazel St. Qiryat-Arieh Petah-Tikva, Israel, 49510 Tel- 972-3-9180-180 Fax-972-3-9180-190 e-mail: marketing@decolink.com web www.decolink.com MECHANICAL OUTLINE Page 9 of 9 CBDA PCSX 1W65 Install.
