User manual

Manual
Article No.: 843057
Deko-Light Elektronik-Vertriebs GmbH 15.12.2020
www.deko-light.com / [e-mail]
Technische Daten können ohne Vorankündigung geändert werden. Irrtümer vorbehalten. /
Technical Data can be changed without advance notice. Errors excepted. 6 / 7
9. Touch-Remote
Operation: 2x AAA Batterien (excl.)
Frequency: 2,4 GHz
Distance: ca. 20 m (inside)
Dimension (LxWxH): 110 x 52 x 20 mm
On/O󰀨 Switch: addressing with “ON”
Touch Wheel: Dimmer 0-100%
Program Button “P”: Change the program
Speed Button “S”: Speed control
Dim Button “D”: Dimmer
1. Connect Touch-Controller with RF Controller
1. Switch on the Power of the RF Controller and then push and hold the “ON” button on the Touch-
Controller within 1 sec., after that the connected lamp ashes up 3 times, then the Touch-Controller and
the Controller are connected.
2. If this step isn’t working please try again.
2. Disconnect Touch-Controller from RF Controller
1. Switch on the Power of the RF Controller and then push and hold the “ON” button on the Touch-
Controller within 1 sec. till the connected lamp ashes up 9 times, then the Touch-Controller and the RF
Controller are disconnected.
2. Now you can address the RF Controller again with the same or another Touch-Controller.
10. Master / Slave Function
● The control of the light source will be e󰀨ect via an RF controller and / or via the WiFi app by using a
smartphone or tablet with the WiFi box..
● The signals are sent to the controller via RF or WiFi which acts as a „master controller“.
● From the „master controller“ the signals are transmitted via a Cat 5 cable to the other controller, these
controllers act as a „slave controller“.
● The controller must not be manually congured as master and slave. This is done automatically when the
„master controller“ is connected to the RF controller or Wi app and the „slave controller“ by association
with the Cat 5 cable.
● The max. cable length between two controllers may not exceed 100 m.
● With the Master / Slave function, the system can be expanded without the need to have to connect to each
controller manually.
On/Off
Program select
Speed select
Dimmer
White select