Manual

Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / [e-mail]
Technische Daten können ohne Vorankündigung geändert werden. Irrtümer vorbehalten.
Technical Data can be changed without advance notice. Errors excepted.
28.10.2021
4 / 4
2. Proper Use
This product is only intended for lighting purposes and may only be operated on normal or non-flammable
surfaces.
Use the product only in protected and dry interior rooms.
Make sure that the surface is suitable for permanently and reliably taking the weight of the light.
3. Care
Repairs may only be carried out by a qualified electrician.
Disconnect the entire product from the mains first and allow it to cool down before cleaning or maintaining.
Use a dry or slightly moistened cloth for cleaning.
Never use any chemicals, flammable cleaning agents or abrasives. These may cause damage to the surface
coating and/or the insulators.
4. Faulty Function
Light switched on at the switch?
Transformer mounted and connected properly?
If available; remote control intact? Check the batteries.
Check the connected lines.
Lamp defective?
5. Changing Lamps
The light source of this lamp is not replaceable. When the light source has reached its end of life, replace the
entire luminaire.
6. Storage and Disposal
Used electronic devices must be brought back to public collection points and must not be disposed of as
household waste.
Storage in a dry and clean environment. Do not strain the product mechanically during storage.
Built in wall lamp, Alwaid 2, Article No.: 620174 / 620175 / 620176 / 620177 / 620178
Product-Notes