Instruction manual

Instruction manual for spiral mixer mod. CPM80-200
Chapter 7
7.1 Ordinary maintenance
For ordinary maintenance we intend all the operations that can be done by the operator. We
intend daily cleaning of the machine, periodic inspections in order to avoid future
inconveniences enabling the operator to use the machine securely.
The ordinary maintenance operations can be securely fulfilled by the operator only after
having read carefully the instructions given in this section.
CLEANING
For a general and constant good working of the machine we suggest a periodic general
cleaning. In particular
For a general and constant good working of the machine we suggest a periodic general
cleaning. In particular :
• The machine must be cleaned after every working cycle.
• Keeping the machine cleaned helps to maintain efficient the most delicate parts of the
mixer and to enable to note easier any unusual mechanical wear or unfastening.
ATTENTION : Do not use water jets to clean both the control panel and the electric board.
Maintenance
TOOLS AND PRODUCTS FOR CLEANING :
ATTENTION : Avoid use of solvents or similar that could damage the painting or the
synthetic material.
Particularly, avoid the use of petrol and trichloroethylene.
DAN
maintenance.
Isola m electric and hydraulic means.
GER : Riscks of electric shocks and sudden movements of the machine during
te the mac ine froh
DANGER : During the general cleaning the machine must be isolated from the main
electric and hydraulic means.
32