Fahrenheit Battery Datasheet

HT7500ET
S O M E L I K E I T H O T
S O M E L I K E I T H O T
SPECIFICATIONS
Nominal Voltage: 12-Volt/750 w.p.c.
@ 15 min. rate to 1.67 v.p.c.
Positive Plate: Pure lead, low-calcium, high-tin alloy
Negative Plate: Lead calcium alloy
Post Seal: Epoxy-sealed
Terminal: Front access, 1/4" - 20 threaded insert
Container: Flame-retardant, UL 94 V-0/39% L.O.I.
Catalyst: Microcat
®
Safety Vent: Low positive pressure,
self-sealing w/ flame arrestor
Float Voltage: 2.25 v.p.c. ± 0.01 v.p.c. (Range: 13.44
to 13.56 volts per 6-cell battery)
Battery Warranty: 5 years in float applications at 95°F (35°C)
Dimensions: 24.00" (609.6 mm) L
x 4.97" (126.3 mm) W
x 12.74" (323.5 mm) H
Weight: 151 Ibs. (68.5 kg)
†
Subject to change without notice.
DISCHARGE RATINGS IN WATTS PER CELL @ 77°F (25°C)
†
Volts Per Cell
5 MINS. 10 MINS. 15 MINS. 20 MINS. 30 MINS. 40 MINS. 50 MINS. 60 MINS.
(VPC)
1.60 1181 958 794 668 499 398 333 287
1.67 1086 891 750 641 488 393 330 285
1.70 1038 857 724 622 480 389 328 283
1.75 951 787 669 580 457 377 320 278
1.80 839 704 604 528 423 353 304 267
n Helios
™
Additive reduces float current up to
75% enhancing high temperature life
n THT
™
Plastic specifically formulated heat resistant
plastic case and cover optimizes compression
n Microcat
®
Catalyst lowers float current, mitigates
thermal buildup and cell dryout
n Exclusive IPF
®
Technology optimizes power
capacity, cell consistency, and long-term reliability
n TempX
™
Alloy inhibits corrosion under the highest
temperature extremes
n Advanced AGM technology for superior high rate,
short term power
n Front access design for easy installation and maintenance
n Reinforced case resists bulging and meets safety
requirements (UL 94 V-0)
n Case & cover heat sealed and 100% tested to
prevent leaks
n Epoxy-sealed posts eliminate leaks
n Puncture resistant micro-porous glass mat separators
extend life
n Flame arresting, low pressure, self-sealing valves are
100% factory tested
n Computer-aided design and manufacturing control
processes and standards to ensure quality products
n All batteries meet or exceed IEEE recommended practices
n Battery design and construction meet UL recognition requirements