Fahrenheit Battery Datasheet

HT200ET
S O M E L I K E I T H O T
S O M E L I K E I T H O T
SPECIFICATIONS
Nominal Voltage: 12-Volts
Rating: 190 Ampere-Hours @ 8 hr. rate
to 1.75 V.P.C.
Positive Plate: Pure lead, low-calcium, high-tin alloy
Negative Plate: Lead calcium alloy
Post Seal: Epoxy-sealed
Terminal: Front access, 1/4" – 20 threaded insert
Case/Cover: Flame-retardant,
THT
™
– UL 94 V-0/>39% L.O.I.
Catalyst: Microcat
®
Safety Vent: Low positive pressure,
self-sealing w/ flame arrestor
Float Voltage: 2.25 V.P.C. ± 0.01 V.P.C. (Range: 13.44V
to 13.56V per battery)
Design life: 10 years in float applications at 95°F (35°C)
Dimensions: Length - 24.15" (613.4 mm)
Width - 4.97" (126.3 mm)
Height - 12.73" (323.4 mm)
Weight: 151 Ibs. (68.5 kg)
†
Subject to change without notice.
DISCHARGE RATINGS IN AMPS @ 77°F (25°C)
†
Volts Per Cell
1 HR. 2 HR. 3 HR. 4 HR. 5 HR. 8 HR. 12 HR. 20 HR. 24 HR.
(V.P.C.)
1.75 144 82 57.3 44.4 36.4 23.5 16.3 10.1 8.4
1.80 136 79.1 55.4 43.1 35.4 23.2 16.0 9.9 8.3
1.85 124 73.1 51.9 40.6 33.5 22.1 15.2 9.4 7.9
1.88 113 68 48.7 38.3 31.7 21.0 14.5 9.0 7.6
1.90 105 63.9 46.2 36.4 30.1 20.0 13.9 8.6 7.2
n Helios™ Additive reduces float current up to 75% enhancing
high temperature life
n THT™ Plastic specifically formulated heat resistant plastic case
and cover optimizes compression
n Microcat
®
Catalyst lowers float current, mitigates thermal buildup
and cell dryout
n Exclusive IPF
®
Technology optimizes power capacity, cell
consistency, and long-term reliability
n TempX™ Alloy inhibits corrosion under the highest
temperature extremes
n
Advanced AGM technology for superior power
n Puncture resistant micro-porous glass mat separators extend life
n Front access design for easy installation and maintenance
n Reinforced case resists bulging and meets safety requirements (UL 94 V-0)
n Case & cover heat sealed and 100% tested to prevent leaks
n Epoxy-sealed posts eliminate leaks
n Flame arresting, low pressure, self-sealing valves are 100% factory tested
n Computer-aided design and manufacturing control processes
and standards to ensure quality products
n All batteries meet or exceed IEEE recommended practices
n Battery design and construction meet UL recognition requirements