Users Manual Part 7

Patient-Filled Cassette
Change
The Patient-Filled Cassette Change is only used
when instructed by your specialty pharmacy.
It is a step-by-step process for replacing the pump
battery, the infusion set, and an empty cassette
with a patient-filled cassette.
Follow the step-by-step procedure in the order
listed to ensure a safe and efficient replacement of
the battery, infusion set, and cassette when the
pump and remote are in communication.
Given the drug volume required to prime the pump,
the pump’s calculation of the time remaining prior to
cassette change may be less than expected. Be
sure to check the time that you will need to replace
the cassette on the Remote so that you can prepare
and have your supplies available when the change is
needed.
1. Before you
start, wash your
hands with
soap and
water.
Appendix B
238 DKPI-09153-001-Rev. 1.4