Users Manual Part 7

Maintenance and Troubleshooting
Problem Possible Causes Corrective Actions
Remote status light turns red when a
Pump Battery is installed.
Pump Battery is too hot or too
cold.
Make sure the temperature
of the battery, or location
where you charge the
battery, is between 59 ºF
(15 ºC) and 95 ºF (35 ºC).
Charging will start
automatically when battery
temperature is within that
range.
Pump Battery and/or Remote
contacts are covered with dirt
or dust.
Disconnect from power
source. Then, use a dry
cloth or soft bristle brush to
clean the contacts.
Table 12: Remote status light turns red when a Pump Battery is installed
DKPI-09153-001-Rev. 1.4 187