Users Manual Part 7

Alarms and Attention Alarms
Pairing Lost Attention Alarm
When you have
paired your pump to
the spare remote,
the original remote
will generate a
Pairing Lost
Attention Alarm
when you bring your
pump back in range.
1. Press
to
silence the
attention alarm.
2. Press to acknowledge the attention alarm.
3. Make sure the pump and remote are within 2"
(50 mm) of each other and away from other
electronics.
4. You will need to pair again to your original
remote.
See "Pair to a Spare Pump" on
page118.
5. If this attention alarm is displayed again,
contact your specialty pharmacy for technical
assistance.
DKPI-09153-001-Rev. 1.4 167