Users Manual Part 6

The remote will display Searching and the last
connected pump's serial number until the pump is
paired to the remote. See "Pair to a Spare Pump"
on page118.
System Information
The System Information displays the Remote,
Radio, Command, Supervisor, and Pump Radio
software versions.
1. Press the Side Button to wake up the
remote.
2. Unlock
the screen by pressing each
front button from left to right.
3. Use the down arrow to scroll to Setup.
4. Press .
5. Press the down arrow to System
Information.
6. Press .
7. Press to view the software versions.
Menu Functions
144 DKPI-09153-001-Rev. 1.4