Users Manual Part 6

Alarms and Attention Alarms
Message Timeout Attention
Alarm
When your remote
did not receive a
response to the last
setting change
command it sent to
the pump, a
Message Timeout
Attention Alarm
displays. This may
be caused by
wireless
communication
interference.
1. Press
to silence the attention alarm.
For more information on resolving the
attention alarm, press
.
2. Press to acknowledge the attention alarm.
3. Place the pump and remote within 12 inches of
each other until communication is restored.
This is indicated when the home screen's top
banner is green or blue.
4. Reconfirm the last setting change to instruct
the remote to send the setting change
command to the pump again.
5. If this attention alarm is displayed again, move
0.8 m (3 ft) away from cell phones, Bluetooth
devices, RFID readers, and Wi-Fi equipment
and repeat
Step 1 through Step 4.
DKPI-09153-001-Rev. 1.4 163