Users Manual Part 2

Set Up
When the system is used in a loud
environment the remote should be kept in a
pant or shirt pocket so that the vibratory
aspect of an alarm notification can be felt.
If the remote has been subjected to the extremes of
the specified storage temperatures, before
charging or using the remote, allow the device to
cool off/warm up for one hour.
1. Plug the second USB cable into the bottom of
the remote and the other end of the USB cable
into the dual USB wall adapter.
Avoid touching the electrical contacts on
the battery charger when it is connected to a
power source.
DKPI-09153-001-Rev. 1.4 49