Users Manual Part 2
5. Wait until the pump batteries are fully charged
before use.
A pump battery is fully charged when the
battery charger status light(s) are green.
Charge the Remote and One
Pump Battery
You should charge the remote before use. The
remote and pump battery in the remote will typically
fully charge in 6 hours or less when connected to the
supplied dual USB AC adapter.
The charging time for the remote may be longer if
connected to power sources other than the
supplied dual USB wall adapter.
The remote will work for up to 1 day (24 hours) on a
full charge. It is recommended to charge the remote
daily. It is a good habit to charge the remote every
evening.
The remote is charged by connecting it to the
supplied dual USB AC adapter or any USB port.
The remote can also be used to charge a pump
battery as you are charging the remote.
You can use the remote while it is charging.
Set Up
48 DKPI-09153-001-Rev. 1.4