Users Manual Part 7
Maintenance and Troubleshooting
Problem Possible Causes Corrective Actions
Pump battery does not charge in the back
of the remote when plugged in (the status
light does not turn on).
Remote is not plugged in to a
power source.
Make sure AC Adapter and
USB Cable are plugged
into the Remote and
connected to a power
source (e.g., wall outlet).
Pump Battery and/or Battery
Charger contacts are covered
with dirt or dust.
Disconnect from power
source. Remove the
battery from the battery
bay.
Then, use a dry cloth or soft
bristle brush to clean the
contacts.
Table 11: Pump battery does not charge when in the back of the remote
DKPI-09153-001-Rev. 1.4 185