® Heavy Duty Power Equipment Owner's Manual This manual contains important safety instructions for gasoline generator models: 4550Pro, 5650, 6500, 6500EL, 7550EL Pro that should be followed maintenance of the generator and batteries READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY, during installation and SAVE THESE INSTRUCTIONS. Contents: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
DEK Product Heavy Duty Power Equipment Lines 4550 Pro, 5650, 6500(EL), 7550 Pro Universal Generator Cover: SAE 10W30 Motor Oil: Heavy duty nylon cover fits over most models of 4000W to 7500W generators. A flexible handle bar flap accommodates most common handle bar designs. The cover keeps water, ice, snow, dust and dirt from damaging your generator when it is in storage. It can also be used as a rain cover to protect the generator when stored outdoors.
DEK Product Heavy Duty Power Equipment Other fine products Commercial Lawn Mowers Lines 4550 Pro, 5650, 6500(EL), 7550 Pro Heavy Duty Power Equipment offered by Heavy Duty Pressure Washers Rental Grade Chipper Shredders Missing Parts Request Form Please [] indicate the part that you are missing: [] [] Hardware bag Wheel Kit Name [] Other Address Date of purchase Model #: [] [] [] [] [] 4550Pro 5650 6500 or 6500EL 755EL Pro Phone Email Serial #: Comments: IMPORTANT: Please include
Heavy Duty Power Equipment WARN INGS This owner's manual is considered a permanent part of the generator and should remain with the generator if resold. The information and specifications included in this publication were in effect at the time of approval for printing. GXi Outdoor Power, LLC, exclusive marketer of DEK Heavy Duty Power Equipment, reserves the right to discontinue or change specifications or design at any time without notice and without incurring any obligation whatever.
WARN IN 6S Heavy Duty Power Equipment 4550 Pro, 5650, 6500(EL), 7550 Pro AC Applications Before connecting an appliance or power cord to the generator: 1. Make sure that appliances are in good working order. Faulty appliances or power cords can create a potential for electrical shock. If an appliance begins to operate abnormally, becomes sluggish or stops suddenly, turn it off immediately. 2.
Heavy Duty Power Equipment Component Identification 4550 Pro, 5650, 6500(EL), 7550 Pro Fuel Ca Fuel Tank Generator models may have different features and/or options than shown in these diagrams. DEK reserves the right to alter product features and specifications. Choke Lever Battery (electric start option only) Air Filter Fuel Vaive Oil Fill Cap--one engine.
Heavy Duty Power Equipment Wheel Kit Assembly 4550 Pro, 5650, 6500(EL), 7550 Pro Pre-assembted wheel / axle assembly. Two pre-assembled, retractable, handle bars, one. on each side of the generator frame. Twist to lock / unlock. Pull or push to extend / retract. Insert each foot assembly through holes in the frame. Tighten nut with adjustable wrench or 8 mm socket. Insert each axle and tighten the bolt to secure in place using an adjustable wrench or 8 mm socket.
Heavy Duty Power Equipment Controls DC Terminals Some generators are shipped with optional DC battery charging cables, have a standard 12V DC receptacle, and have a 12V cigarette lighter style outlet. The battery must be connected to the generator DC terminals with the proper polarity (battery positive to generator red terminal and battery negative to the generator black terminal). 4550 Pro, 5650, 6500(EL), 7550 Pro Disconnecting the battery cables: 1. Stop the engine. 2.
Heavy DutyPowerEquipment Controls 4550 Pro, 5650, 6500(EL), 7550 Pro Recoil Starter The engine was shipped without engine oil. DO NOT START THE ENGINE WITHOUT FILLING THE ENGINE WITH OIL. Use SAE 10W-30 for normal conditions and SAE 5W-30 when the ambient temperature is below 32 ° F. To start the engine, pull the starter grip lightly until resistance is felt, then pull briskly. NOTICE: Do not allow the starter grip to snap back against the engine. Return it gently to prevent damage to the starter.
Heavy Duty Power Equipment Operating CARBON MONOXIDE GAS CARBON MONOXIDE YOU IN MINUTES. Using a generator indoors CAN KILL the Generator 4550 Pro, 5650, 6500(EL), 7550 Pro O|LFJELE8CAP Generator exhaust contains carbon monoxide (CO). This is a poison you cannot see or smell. If you can smell the generator exhaust, you are breathing CO. But even if you cannot smell the exhaust, you could be breathing CO. NEVER use a generator inside homes, garages, crawlspaces, or other partly enclosed areas.
Heavy Duty Power Equipment Operating Step 4. Set the fuel valve lever to the ON position by rotating it clockwise. Step 5. Pull the choke lever to the CLOSED position. diagram of the choke lever. See page 7 for a Step 6. Turn the generator ON/OFF switch to the "ON" position. Step 7. Start the engine 1. 2. If you have an electric starter, press the electric starter switch to the START position, hold it there for 5 seconds and let it come to rest in the ON position once the engine has started.
Maintenance Heavy Duty Power Equipment MAINTENANCE 4550 Pro, 5650, 6500(EL), 7550 Pro Engine Oil Change Drain the oil while the engine is warm to assure rapid and complete draining. The Importance of Maintenance Good maintenance is essential for safe, economical, and trouble-flee operation. It will also help reduce air pollution. 1.
Maintenance Heavy Duty Power Equipment 4. 5. 6. 7. 4550 Pro, 5650, 6500(EL), 7550 Pro TRANSPORTING When transporting the generator, turn the engine switch and the fuel valve OFF. Keep the generator level to prevent fuel spillage. Fuel vapor or spilled fuel may ignite. Visually inspect the spark plug. Discard it if the insulator is cracked, chipped or fouled. Measure the plug gap with a feeler gauge. Correct as necessary by carefully bending the side electrode. The gap should be: 0.028 0.031 in (0.
Heavy DutyPowerEquipment Symptom: Potential Causes Fuel valve off/out of fuel No spark_ engine not catching, Check / solution Fill tank/turn fuel valve on Spark arrestor clogged Choke is open Vacuum check valve has failed On/Off switch broken Oil level too low Oil switch Remove, clean and replace. Close choke by pulling choke wire out. Open choke after starting Replace check valve Use fuel shut-off as ON/OFF switch until switch is replaced.
Heavy DutyPowerEquipment Symptom: Potential Causes Bad extension Device failed Troubleshooting 4550 Pro, 5650, 6500(EL), 7550 Pro Engine runs and volt meter shows 240VAC and 120VAC, but no power goes to connected Check / solution cord/power strip Push button breaker tripped Try different / shorter extension cord or a different power strip Try a different light bulb or device Push button breaker tripped GFCI tripped GFCI failed Push the red reset button very deep/firmly Replace GFCl with any GFCI o
Heavy DutyPowerEquipment PRODUCTS COVERED Limited BY THIS WARRANTY: Warranty 4550 Pro, 5650, 6500(EL), 7550 Pro & Service LENGTH OF WARRANTY:* IFROM THE DATE OF ORIGINAL RETAIL PURCHASE) NONCOMMERCIAL/NONCOMMERCIAL RENTAL RENTAL Engine 36 months / 300 hours 12 months / 300 hours 3 months / 300 hours Battery 3 months 3 months 3 months Alternator 36 months / 300 hours 12 months / 300 hours 3 months / 300 hours Electrical and Frame Components 24 months / 300 hours 12 months/300 3 month
