Owner`s manual

15
30SB,36SB,45SB

Rev Nov2014
Snow BEAST
Operang Instrucons
Transmission Control
Yoursnowblowerisequippedwithaneasily
adjustabletransmissioncontrol,whichcanbe
adjustedforforwardandreversespeed.

Therearesixforwardandtworeversespeeds.

Tochangethespeed,pullthehandleouttotheright
andmovethehandletothedesiredspeed.
IMPORTANT! The snow blower belts are adjusted to ensure the augers stop turning within five (5) seconds of
releasing the impeller control lever. If you are making any belt adjustments whatsoever, for your safety and the
safety of others around you, you must ensure the belts are re‐adjusted to achieve this design specificaon.
To Stop Engine
Tostoptheengine,pullthesafetykeyupunltheengine
andaugers/impellerstopsrunning.Forsafety,itis
recommendedthatyouremovethekeywhennotusing
thesnowblower.
WARNING
WARNING! Donotoperatethesnowblow‐
erwithdefecveguards,shields,orwithout
thesafetydevicessecurelyinplace.
Engage Transmission Drive
Toengagethetransmissiondrivesqueezetherightleverto
thehandgrip.

Todisengage,letgooftherightlever.
Engage Augers/Impeller Control
Toengagetheaugers/impellerdrive,squeezethele
levertothehandgrip.
Todisengagereleasethelelever.




DONOT shispeedswhile
thetransmissionisengaged.
Cometoacompletestop
anddisengagethetransmis‐
sionhandlebeforechanging
speedorswitchingfrom
forwardtoreverse.
WARNING