Snow Blower by Owner’s Manual This manual contains important safety instruc ons for the gasoline engine powered snow blower models: 30SB, 36SB, 45SB READ SAFETY WARNINGS AND OPERATING INSTRUCTIONS CAREFULLY. SAVE THIS MANUAL.
Snow BEAST 30SB, 36SB, 45SB Copyright© 2012 by GXi Outdoor Power, LLC. All rights reserved. No part of this publica on can be reproduced or distributed without prior wri en permission of GXi Outdoor Power, LLC Clayton, NC 27520 USA. DEK is a registered trademark of GXi Outdoor Power, LLC GXi Outdoor Power, LLC reserves the right to discon nue or change specifica ons or design at any me without no ce and without incurring any obliga on whatsoever.
Snow BEAST 30SB, 36SB, 45SB BEAST SERIES Check out our other great products at www.beastpowerequipment.
Snow BEAST 30SB, 36SB, 45SB Contents Safety Informa on and Warnings............................................................. 1 Prepara on Safety Precau ons ................................................................ 2 Opera on Safety Precau ons.................................................................... 3 Safety Decals ........................................................................................... 5 Product Specifica ons ........................................................
Snow BEAST Safety Informa on and Warnings Safety Informa on 30SB, 36SB, 45SB Training Emission Control System Informa on 1. Read, understand, and follow all instruc ons on the machine and manual(s) before a emp ng to assemble and operate. 2. Operator must be familiar with all controls, their opera ons, and how to stop the engine and disengage the controls quickly. 3. Never allow children to operate this machine. 4. Never allow adults to operate this machine without proper instruc on. 5.
Snow BEAST Prepara on Safety Precau ons Prepara on—Safety Precau ons safety signs. 1. Inspect the area where the equipment is to be used and remove all objects such as rocks, mats, and wire which can be thrown by the machine causing serious injury or death. 2. Disengage all clutches and shi to neutral before star ng the engine. 3. Disengage all control levers before star ng the engine. 4.
Snow BEAST Opera on Safety Precau ons Equipment Opera on—Safety Precau ons 14. Keep hands and feet away from augers/ impeller . This product is capable of amputa ng hands and feet. 15. Be alert and slow down when making turns. Also look le , right, and behind before changing direc ons and reversing to be sure there is a clear path. 16. Never operate snow blower at high transport speeds on slippery surfaces. 17. Never operate snow blower under the influence of alcohol and drugs. 18.
Snow BEAST Opera on Safety Precau ons 30SB, 36SB, 45SB Do NOT over‐prime the engine. Pressing the primer bulb more than 3x could result in flooding the carburetor making the engine hard to start or cause fuel to leak from the carburetor inlet. Clearing A Clogged Chute—Safety Precau ons 1. SHUT THE ENGINE OFF! 2. Wait at least 10 seconds to be sure the augers have stopped rota ng. 3. Remove and ground the spark plug when clearing the blockage. GASOLINE IS HIGHLY FLAMMABLE AND EXPLOSIVE.
Snow BEAST Safety Decals 30SB, 36SB, 45SB Safety Decal Iden fica on The labels shown below are located on your snow blower to warn you of poten al hazards and provide you with important safety informa on. If these decals become difficult to read or are missing from the snow blower, please contact GXi Parts & Service, LLC at (919)‐550‐3221 or www.beastpowerequipment.com for a replacement.
Snow BEAST Product Specifica ons 30SB, 36SB, 45SB * Product Specifica ons may change without no ce.
Snow BEAST Control Panel and Snow Blower Components 30SB, 36SB, 45SB Throughout this manual, instruc ons are given on the opera on of your STANELY snow blower. We recommend that while going through this manual, you have your snow blower available for quick and easy access in order to orient yourself with the controls, maintenance and orienta on of different parts. Please read through the manual before opera ng. Control Panel Below is a diagram of the control panel.
Snow BEAST Missing Parts Request Form Please indicate the part that you are 30SB, 36SB, 45SB Name Hardware bag Other Address Date of purchase Model #: Phone Email Serial #: Comments: IMPORTANT: Please include your receipt. Without a receipt, your order will be delayed. You may also email us at: customerservice@gxioutdoorpower.com Fax: (919)‐550‐3277 If emailing, please scan in your proof of purchase. Please refer to pages 31‐35 for a detailed parts lis ng and descrip on.
Snow BEAST Assembly Instruc ons 30SB, 36SB, 45SB Step 1: Control Panel Handles 1. Align the two holes on each side of the control panel handles over the lower handle frame. 2. Insert the bolts through the handlebar holes and frame holes. Secure in place with hardware provided. Insert bolts from the inside. Step 2: Direc onal Discharge Chute 1. Fit the black plas c round spacer onto impeller housing before installing chute. Apply light coat of grease onto spacer. 2.
Snow BEAST Assembly Instruc ons 30SB, 36SB, 45SB Step 3: Chute Rota on Cable (con nued) 1. Locate the connec on: The chute rota on cable connec on is located at the base of the discharge chute between the engine and the discharge chute. 2. Slide the threaded end of the connector down the cable in order to easily see the end of the cable connec on. The center sec on should be about 3/4” to 1” beyond the end of the cable.
Snow BEAST 30SB, 36SB, 45SB Step 4: Chute Direc on Control Cable Support With the rubber lined strap removed, put the chute direc on control cable and the chute deflector cable into the opening, and press the strap together aligning the hole for the bolt. Secure strap to side of the engine. NOTE: Rotate discharge chute and ensure there is no binding of any cables and there is enough slack in the deflector cable for full rota on. Step 5: Dri Cu ers (if desired) 1.
Snow BEAST Assembly Instruc ons 30SB, 36SB, 45SB Step 7: Auger and Transmission Control Cables Control cables are preset at the factory, but may require addi onal adjustment for op mal opera on. Control cables require periodic inspec on and maintenance to maintain op mal performance. 1. Locate the black cable on the right side (standing from the operator posi on) of the snow blower. Ensure the cable is properly seated in the plas c guide pulley at the rear of the chassis. 2.
Snow BEAST Assembly Instruc ons 30SB, 36SB, 45SB Step 9: Headlight 1. Connect snow blower headlight wire plug to the headlight bulb. 2. Connect the headlight bezel to the control panel. A. Tilt headlight assembly and align tabs on the top of the headlight bezel with the notches in the control panel. Insert the notches into the panel. B. Tilt headlight assembly down while gently squeezing the headlight bezel and push Step 10: Filling Oil and Gasoline 1. Fill the engine with SAE 5W‐30 engine oil.
Snow BEAST Star ng the Engine 30SB, 36SB, 45SB WARNING DANGER Before a emp ng to use your snow blower, make sure you are familiar with all of the components and have read the manual. DANGER: Exhaust contains poisonous carbon monoxide, a colorless and odorless gas. Breathing exhaust can cause loss of consciousness and may lead to death. Do not operate the engine in a confined space where dangerous carbon monoxide fumes can collect.
Snow BEAST Opera ng Instruc ons 30SB, 36SB, 45SB Transmission Control Engage Transmission Drive Your snow blower is equipped with an easily adjustable transmission control, which can be adjusted for forward and reverse speed. To engage the transmission drive squeeze the right lever to the hand grip. To disengage, let go of the right lever. There are six forward and two reverse speeds. To change the speed, pull the handle out to the right and move the handle to the desired speed.
Snow BEAST Opera ng Instruc ons 30SB, 36SB, 45SB Control Interlock Feature—One Hand Free Opera on The snow blower is equipped with a control interlock feature to allow the operator one hand free to change the direc on of the discharge or adjust the discharge deflector without stopping the forward progress of the machine. The interlock feature allows the operator’s le hand to be free during use a er both handles are fully engaged into the opera ng posi on.
Snow BEAST Opera ng Instruc ons 30SB, 36SB, 45SB Chute Direc on Control Headlights To rotate the chute to the right rotate the chute con‐ trol clockwise. To turn on the lights, flip the switch up. To turn off the lights, flip the switch down. * Some models are equipped with an always on head‐ light that is always on when the engine is running. To rotate the chute to the le rotate the chute control counter‐clockwise.
Snow BEAST Opera ng Instruc ons 30SB, 36SB, 45SB Using your BEAST Snow Blower The following ps will help ensure proper and long las ng use of your BEAST snow blower. ALWAYS wear proper Figure 1 Figure 1 Before use, always ensure there is nothing lodged in the Impeller collector, or impeller area. Inspect the auger and impel‐ ler for damage from rocks or other debris, and ensure there is no string, twine, etc stuck on the auger or im‐ peller sha s.
Snow BEAST 30SB, 36SB, 45SB Avoiding Impeller Freeze‐Up Impeller freeze‐up occurs when snow and ice remain in the impeller housing a er the job is finished. The remaining snow and ice melts par ally and only temporarily due to residual heat in the snow blower. The remaining mixture re‐freezes and essen ally “welds” the impeller to the impeller housing and prevents rota on of the impeller.
Snow BEAST General Maintenance 30SB, 36SB, 45SB The Importance of Maintenance Regular maintenance is essen al to ensure your snow blower con nues to deliver safe and high‐quality performance. CAUTION CAUTION! Before making any adjustments and/or servicing to your BEAST Snow Blower , make sure the snow blower is on a level surface, with the igni on switch off, the key removed, and the augers disengaged.
Snow BEAST 30SB, 36SB, 45SB Maintenance Schedule Time Interval Item Procedure Belts Inspect Tension (adjust if needed) Augers/Impeller Inspect for damaged and bent parts Shear Bolts Inspect—both shear bolts must be pre‐ sent Engine Oil Break‐in Every 8 hrs Every 40 hrs Every 100 (first 5 hrs) (daily) (weekly) hrs (Bi‐weekly) X Every 200 hrs (monthly) X X Check—add as need‐ ed X Change 1.2‐1.
Snow BEAST Service Adjustments 30SB, 36SB, 45SB Adjus ng Augers/Impeller Cable Adjus ng Drive Cable If tension seems to be too loose or too ght, the augers/impeller, cables needs to be readjusted. If tension seems to be too loose or too ght, the drive cables needs to be readjusted. 1. Loosen the bolt above where the cable screws in to the le side of the control panel. 2. Loosening the bolt en‐ ables the cable to screw in further, which makes the augers/ impeller handle ght‐ er. 3.
Snow BEAST Service Adjustments 30SB, 36SB, 45SB Ver cal Service Posi on For some procedures it is necessary to put the snow blower into the ver cal service posi on as instructed below. This allows for easy access to the top and the bo om of the snow blower. 1. Remove or place the dri cu ers into the stored posi on. 2. Push up on the handle bars and rock the snow blower forward onto the front face of the collector housing as shown below.
Snow BEAST Service Adjustments 30SB, 36SB, 45SB Inspec on & Replacement of the Transmission Belt The transmission belt is located under the belt guard between the engine and impeller. Follow the procedure below to inspect or replace the belt. Remove key, remove spark plug cable from spark plug and ground to the engine. 1. Loosen the two fasteners on either side of the belt cover. The cover will li up and away from the snow blower during removal. The fasteners require a 10mm wrench or socket/ ratchet. 2.
Snow BEAST Service Adjustments 30SB, 36SB, 45SB Inspec on & Replacement of the Impeller / Collector Belts The impeller / collector belts are also located under the belt guard between the engine and impeller. Follow the procedure below to inspect or replace the belts. Always replace these belts as a set. Remove key, remove spark plug cable from spark plug and ground to the engine. 1. Loosen the two fasteners on either side of the belt cover.
Snow BEAST Service Adjustments Adjus ng Discharge Deflector The discharge chute is preset at the factory, but may require adjustment over me or during maintenance. For adjustments, follow the procedure below: 1. Loosen the two nuts at the chute cable mount on the discharge chute. 2. To make the chute open more, adjust nuts so the cable end moves closer to the discharge deflector (upward). 3.
Snow BEAST Service Adjustments 30SB, 36SB, 45SB Transmission System Adjustment If the fric on wheel is changed or the snow blower requires more force to the ground to push snow, follow the procedure below to setup the transmission system. Remove key, remove spark plug cable from spark plug and ground to the engine. Pull Tab 1. Inspect the transmission engagement handle. The handle should have approximately 60 degrees of travel to ensure the correct transmission tension can be applied.
Snow BEAST Storage Instruc ons 30SB, 36SB, 45SB Short Term Storage Let engine cool before storing and do not store near flame, high heat, and possible igni ons from sparks. Always clean off all flammable material as well as grime and dirt before storage. Wash with mild detergent and water only. A er washing the machine engage the engine at high and let the snow blower run for 5 minutes. Store snow blower only on the ground. Follow recommenda ons to avoid impeller freeze up.
Snow BEAST Troubleshoo ng 30SB, 36SB, 45SB Problem Possible Causes Solu on Engine will not start 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Fuel is leaking from the engine. 1. Primer bulb was pressed too many mes. 1. Do not press primer more than 3 mes. Wipe off excess fuel and allow to dry COMPLETELY before a emp ng to start 2. Fuel hose has become dis‐connected 2. Re‐connect fuel hose and clamp(s) 3. Fuel tank and carburetor needs to be flushed and 3.
Snow BEAST Troubleshoo ng 30SB, 36SB, 45SB Problem Possible Causes Solu on Snow blower will not move forward or reverse 1. Transmission cable out of adjustment (too loose) or damaged. 2. Fric on wheel rubber worn 1. Readjust transmission cable If damaged, replace and readjust (page 27) 2. Replace fric on wheel assembly (page 26) Cannot move snow blower when the engine is off 1. Transmission handle is pressed 1. Release transmission handle into the engaged posi on 2. Transmission cable out of 2.
Snow BEAST Rev Nov2014 Parts Diagram 31 30SB, 36SB, 45SB
Snow BEAST Rev Nov2014 30SB, 36SB, 45SB 32
Snow BEAST Rev Nov2014 30SB, 36SB, 45SB 33
Snow BEAST 30SB, 36SB, 45SB 30SB, 36SB, 45SB Chassis Assembly Reference Rev Nov2014 34
Snow BEAST Replacement Parts 30SB, 36SB, 45SB To order replacement parts, visit our web‐site at www.serviceandwarrantyonline.com Or dial Toll Free 1‐800‐393‐0668 Monday‐Friday 8AM‐5PM OEM Replacement Parts Engine Parts GXi Part Number E10211 B01712 B09612 Descrip on Fuel Primer Bulb Kit: Includes primer bulb assembly, fuel line, and 2 clamps. Models: 30SB, 30SS, 36SB, 36SS, 45SB, 45SS Fuel Tank with gas cap, fuel valve, fuel line, and clamps for 420cc Snow Blower Engine.
Snow BEAST Limited Warranty & Service 30SB, 36SB, 45SB Length of Warranty: *(from the date of original retail purchase) Products Covered by this Warranty Engine Transmission Snow Blower All Steel Gear Case Non‐commercial/ Non‐rental 36 Months Limited 36 Months Limited 36 Months Limited 60 Months Limited Commercial 90 Days Limited 90 Days Limited 90 Days Limited 12 Months Limited Rental 90 Days Limited 90 Days Limited 90 Days Limited 12 Months Limited *LENGTH OF WARRANTY: Ba eries supplied with applic
