Owner`s manual

54Z, 62Z

Z- BEAST

BEAST Finish Mower

Rev: Mar2011

Step 1: Front Wheel Assembly

Note: Some mowers may be shipped with the front wheels

pre-assembled.

A. Remove packaging materials surrounding the front wheels

and remove the bolt threaded into the front wheel. Retain

this bolt and washer for future use.

B. Unscrew the fastener holding the bolt to the steel shipping

rack. Set the nut and bolt aside. It will be re-used in the

mower assembly process.

C. Remove the mower from the steel shipping rack.

D. Slide the front wheel pivot shaft through the sleeve. If the

fit is tight, apply some grease to the pivot shaft.

E. Secure the shaft in place with the hardware that was

provided with the wheel.

F. Repeat steps A through E for the second front wheel.

G. Apply grease to the front wheel sleeve grease fittings

when complete.

Assembly Instructions