User's Guide

www.dejero.com
41 | Dejero EnGo 260 User Guide
Message Error/warning
number
Description Possible solution
Poor network Warning 04
There is insufficient
connection bandwidth
to support the bitrate.
Try repositioning the EnGo
for better wireless coverage,
or change to a longer latency
setting. For more
information, see Configure
the latency on page 19.
One or more
modems have
malfunctioned.
Restarting this
device may
resolve the
problem.
Error 05 Unable to establish a
network connection.
To reinitialize the modems:
1. Power off the EnGo.
2. Disconnect the power
source.
3. Wait 30 seconds,
reconnect the power
source, and restart.
If this does not resolve the
problem, contact Dejero
Support.
Output not
assigned
Warning 09 The EnGo might not
be assigned to a
receiver output in
Control.
The assigned
receiver output is
either turned off or
inactive.
Use Control to assign an
output. For more information,
visit support.dejero.com to
read the Dejero Control User
Guide.
Device is disabled.
Please contact
Dejero.
Error 10 Either the EnGo or
the assigned receiver
is disabled in Control.
Enable the EnGo or the
assigned receiver in Control.
For more information, visit
support.dejero.com to read
the Dejero Control User
Guide.