User's Guide
Table Of Contents
- Dejero Labs Inc.
- Copyright, Trademarks, and Patents
- Symbols and Conventions
- Contents
- Warranty and Liability
- Safety Warnings and Hazards
- Class A device
- Federal Communications Commission statement
- Industry Canada statement
- RF Exposure Notice
- Explosive Atmosphere
- Blasting or Construction Sites
- Hospitals
- Aircraft
- Driving
- In-vehicle use
- Personal Health and Safety
- Medical Implant Devices
- Hearing Devices
- Electrical Safety
- Li-ion secondary (rechargeable) battery notice
- Handling and Operating Conditions
- About the Dejero EnGo 260
- What’s included
- About Dejero Control
- Powering the EnGo
- Starting the EnGo
- Using the EnGo
- Connecting to the EnGo
- Inserting the EnGo into the backpack
- About the Preview screen
- Specifying the camera input type
- Changing SIM modules
- Configuring the EnGo
- Adjust the brightness display
- Configure the video input
- Configure the audio input
- Configure the video loss setting
- Configure the Live Resolution setting
- Configure the latency
- Configure Auto Start
- Configure the connection type
- Configure the connection settings
- Define the SIM set
- Activate the hotspot
- Rename the hotspot
- Change the hotspot password
- View devices connected to the hotspot
- Managing Wi-Fi connections
- Managing return feeds
- Managing SIM cards
- Transmitting live
- Using Store & Forward
- Transferring files
- About warning and error states
- Using the Remote Control
- Changing the display orientation
- Viewing connection information
- About stream indicators
- Troubleshooting
- Warning and error messages
- Technical specifications
- Additional help
- Document revision history
www.dejero.com
33 | Dejero EnGo 260 User Guide
2. On the Preview screen, tap .
3. Tap Transfer.
4. Tap Clips or Files.
5. Tap Actions.
6. On the S&F Clip Selection screen, select clips.
7. Tap Actions.
8. Tap Backup.
9. Select the drive.
10. To start the backup and save it in the currently selected destination folder, tap Backup.
Record a Store & Forward clip
Prerequisite: Confirm that the Store & Forward clip quality that appears on the Record button is
appropriate for the clip. For more information, see Set the quality of Store & Forward clips on
page 14.
Note: You do not need to connect the EnGo to a network to record a Store & Forward
clip.
1. On the Preview screen, tap Record.
The Preview screen shows the video that you are recording.
Statistics about the current clip also appear above and below the Record button, including the
clip length, resolution, and the quality setting. Based on the available free disk space and the
current quality setting, the estimated time remaining for the current clip appears. The format of
the clip length and time remaining is: hh:mm:ss.
Stop recording
1. To stop recording, on the Preview screen, tap Stop.
2. Tap Yes.
The Preview screen continues to show the input from the camera. The device remains ready to
resume broadcasting. To resume the transmission, tap Record.
Transmit live and record a Store & Forward clip
You can transmit live and record a Store & Forward clip at the same time. Depending on the
connection and network conditions, the resolution of the live broadcast might change, but the
resolution used when recording the Store & Forward clip does not change.
1. On the Preview screen, tap Go Live.
2. Tap Record.
The Preview screen shows the video that you are transmitting and recording.