User's Guide
Table Of Contents
- Dejero Labs Inc.
- Copyright, Trademarks, and Patents
- Symbols and Conventions
- Contents
- Warranty and Liability
- Safety Warnings and Hazards
- Class A device
- Federal Communications Commission statement
- Industry Canada statement
- RF Exposure Notice
- Explosive Atmosphere
- Blasting or Construction Sites
- Hospitals
- Aircraft
- Driving
- In-vehicle use
- Personal Health and Safety
- Medical Implant Devices
- Hearing Devices
- Electrical Safety
- Li-ion secondary (rechargeable) battery notice
- Handling and Operating Conditions
- About the Dejero EnGo 260
- What’s included
- About Dejero Control
- Powering the EnGo
- Starting the EnGo
- Using the EnGo
- Connecting to the EnGo
- Inserting the EnGo into the backpack
- About the Preview screen
- Specifying the camera input type
- Changing SIM modules
- Configuring the EnGo
- Adjust the brightness display
- Configure the video input
- Configure the audio input
- Configure the video loss setting
- Configure the Live Resolution setting
- Configure the latency
- Configure Auto Start
- Configure the connection type
- Configure the connection settings
- Define the SIM set
- Activate the hotspot
- Rename the hotspot
- Change the hotspot password
- View devices connected to the hotspot
- Managing Wi-Fi connections
- Managing return feeds
- Managing SIM cards
- Transmitting live
- Using Store & Forward
- Transferring files
- About warning and error states
- Using the Remote Control
- Changing the display orientation
- Viewing connection information
- About stream indicators
- Troubleshooting
- Warning and error messages
- Technical specifications
- Additional help
- Document revision history
www.dejero.com
29 | Dejero EnGo 260 User Guide
1. Tap Go Live.
You can monitor the video feed as it transmits.
Switch to a CellSat connection
During a live transmission, you can switch to a CellSat connection, if one is available.
1. In the Start CellSat dialog box, perform one of the following actions:
• To start using the CellSat connection, tap Yes.
• To check your connections first, tap No.
Note: If you want to use the CellSat connection after checking your connections, on the
Preview screen, tap Start CellSat. Tap Yes.
Stop a transmission
1. On the Preview screen, tap Stop.
2. Tap Yes.
The Preview screen continues to show the input from the camera. The device remains ready to
resume broadcasting. To resume the transmission, tap Go Live.
If you switched to a CellSat connection, the EnGo disconnects the CellSat connection when you
stop the transmission.
Tip: After you finish transmitting, always charge your EnGo battery.
Using Store & Forward
With Store & Forward (S&F), you can record up to 30 hours of HD video clips directly onto the
transmitter. You can also transfer and delete clips. Recording a clip can happen independently
of a live transmission. You can also start and stop recording during a live transmission.
If you turn on transfer while recording, the EnGo starts to transfer the clip as it is recording it.
There might be a delay between 1 and 10 seconds between starting the recording and the
transfer starting.
Each clip is named with the date and time that the clip finished recording, using the following
format: YYYY-MM-DD_hhmmss.
Set up Store & Forward
You can record Store & Forward clips when the transmitter is in either Live and Recording or
Recording mode. The selected quality setting impacts the file size of the clip; a higher quality
setting results in a larger file.
You can set the quality setting when configuring Store & Forward. You can also select the
quality setting on the Preview screen.