User's Guide

www.dejero.com
21 | Dejero EnGo 260 User Guide
4. Tap Auto Start.
5. Tap your delay selection: No delay, 1 minute, 2 minutes, 3 minutes, 4 minutes, or 5
minutes.
Note: If you turn on Auto Start, the live stream starts when the transmitter detects video.
If the live stream is stopped manually, Auto Start does not start again until you turn off
and turn on the EnGo again.
Configure the connection type
You can set the type of connection to use when transmitting data.
1. On the Preview screen, tap .
2. Tap Settings.
3. Tap Connections.
4. Tap Connection Types.
5. Tap All, Ethernet, or Modems.
6. Tap Back.
Connection type settings
Setting Description
All
The transmitter sends data through all available connections, including
cellular, Ethernet, and Wi-Fi. The transmitter uses only the connections
that are available. If multiple connections are available, the transmitter
uses all connection types simultaneously.
Ethernet The transmitter sends data over Ethernet, Wi-Fi, or both. If you select
this option but do not have an Ethernet cable connected or a Wi-Fi
connection configured, an error appears on the screen.
Modems The transmitter sends data over the modem connections only. Use this
mode when your Wi-Fi or Ethernet connection is poor, or with high
usage by others resulting in low bandwidth.
Configure the connection settings
1. On the Preview screen, tap .
2. Tap Settings.
3. Tap Connections.
4. Tap Preferred Connection.
5. Tap Automatic, Ethernet, or Cellular.
6. Tap Back.