User's Guide
Table Of Contents
- Dejero Labs Inc.
- Copyright, Trademarks, and Patents
- Symbols and Conventions
- Contents
- Warranty and Liability
- Safety Warnings and Hazards
- Class A device
- Federal Communications Commission statement
- Industry Canada statement
- RF Exposure Notice
- Explosive Atmosphere
- Blasting or Construction Sites
- Hospitals
- Aircraft
- Driving
- In-vehicle use
- Personal Health and Safety
- Medical Implant Devices
- Hearing Devices
- Electrical Safety
- Li-ion secondary (rechargeable) battery notice
- Handling and Operating Conditions
- About the Dejero EnGo 260
- What’s included
- About Dejero Control
- Powering the EnGo
- Starting the EnGo
- Using the EnGo
- Connecting to the EnGo
- Inserting the EnGo into the backpack
- About the Preview screen
- Specifying the camera input type
- Changing SIM modules
- Configuring the EnGo
- Adjust the brightness display
- Configure the video input
- Configure the audio input
- Configure the video loss setting
- Configure the Live Resolution setting
- Configure the latency
- Configure Auto Start
- Configure the connection type
- Configure the connection settings
- Define the SIM set
- Activate the hotspot
- Rename the hotspot
- Change the hotspot password
- View devices connected to the hotspot
- Managing Wi-Fi connections
- Managing return feeds
- Managing SIM cards
- Transmitting live
- Using Store & Forward
- Transferring files
- About warning and error states
- Using the Remote Control
- Changing the display orientation
- Viewing connection information
- About stream indicators
- Troubleshooting
- Warning and error messages
- Technical specifications
- Additional help
- Document revision history
www.dejero.com
17 | Dejero EnGo 260 User Guide
Adjust the brightness display
The preferred brightness can be manually set or auto-adjust can be turned on to change the
brightness automatically, based on the light sensor. Auto-adjust brightens the display in bright
light and dims it in low light.
1. On the Preview screen, tap .
2. Tap Brightness.
3. Use the slider to adjust the brightness.
4. Tap the check box to turn the Auto-adjust feature on or off.
Configure the video input
By default, the transmitter automatically detects HDMI or SDI connections, frame rate, and
resolution with its Auto setting. If you select SDI as the input type and the EnGo does not detect
the frame rate and resolution settings automatically, you can set them manually.
1. On the Preview screen, tap .
2. Tap Settings.
3. Tap Input.
4. Tap Video Input.
5. Set the video input to Auto, SDI, or HDMI.
6. Tap Back.
7. If you selected SDI, set the Input Resolution and Input Frame Rate.
Input Resolution Input Frame Rates
480i 29.97
576i 25
720p 50, 59.94, 60
1080i 25, 29.97, 30
1080p 23.98, 25, 29.97, 30
1080p 50, 59.94, 60 (3G-SDI Level-A)
8. To exit from Input, tap Back.
9. Tap to close the menu.
Note: Depending on the frame rate that you select, the available input resolutions
change.