User's Guide
Table Of Contents
- Dejero Labs Inc.
- Copyright, Trademarks, and Patents
- Symbols and Conventions
- Contents
- Warranty and Liability
- Safety Warnings and Hazards
- Class A device
- Federal Communications Commission statement
- Industry Canada statement
- RF Exposure Notice
- Explosive Atmosphere
- Blasting or Construction Sites
- Hospitals
- Aircraft
- Driving
- In-vehicle use
- Personal Health and Safety
- Medical Implant Devices
- Hearing Devices
- Electrical Safety
- Li-ion secondary (rechargeable) battery notice
- Handling and Operating Conditions
- About the Dejero EnGo 260
- What’s included
- About Dejero Control
- Powering the EnGo
- Starting the EnGo
- Using the EnGo
- Connecting to the EnGo
- Inserting the EnGo into the backpack
- About the Preview screen
- Specifying the camera input type
- Changing SIM modules
- Configuring the EnGo
- Adjust the brightness display
- Configure the video input
- Configure the audio input
- Configure the video loss setting
- Configure the Live Resolution setting
- Configure the latency
- Configure Auto Start
- Configure the connection type
- Configure the connection settings
- Define the SIM set
- Activate the hotspot
- Rename the hotspot
- Change the hotspot password
- View devices connected to the hotspot
- Managing Wi-Fi connections
- Managing return feeds
- Managing SIM cards
- Transmitting live
- Using Store & Forward
- Transferring files
- About warning and error states
- Using the Remote Control
- Changing the display orientation
- Viewing connection information
- About stream indicators
- Troubleshooting
- Warning and error messages
- Technical specifications
- Additional help
- Document revision history
www.dejero.com
16 | Dejero EnGo 260 User Guide
Swap the SIM module
1. Power off the EnGo.
2. Remove the SIM module from the
EnGo by loosening the thumbscrews.
3. Replace the SIM module by lining up
and tightening the thumbscrews.
Ensure that the module is aligned
correctly and tightly connected.
Change the SIM cards in the accessible SIM module
Note: When inserting the SIM cards, use the diagram on SIM module to determine the
correct orientation.
1. Power off the EnGo.
2. Remove the SIM module from the EnGo by loosening the thumbscrews.
3. Remove the SIM cards by pushing the SIM card in gently. The SIM card will spring out.
4. If necessary, pull the SIM card the rest of the way out of the slot.
5. Place a SIM card into the correct slot in the SIM module, with the notch on the SIM card
inserted first. For more information, visit support.dejero.com
to read the SIM Configuration
Guide.
6. Gently push the SIM card into the slot, until it locks into place. If the SIM card is inserted
incorrectly, it does not insert all the way.
7. Repeat steps 3 through 6 for each slot.
8. Replace the SIM module by lining up and tightening the thumbscrews. Ensure that the
module is aligned correctly and tightly connected.
Configuring the EnGo
Use the Settings screen to configure the transmitter settings.
Note: When you are streaming live content, you cannot configure the settings for the
EnGo.