User's Guide
Table Of Contents
- Dejero Labs Inc.
- Copyright, Trademarks, and Patents
- Symbols and Conventions
- Contents
- Warranty and Liability
- Safety Warnings and Hazards
- Class A device
- Federal Communications Commission statement
- Industry Canada statement
- RF Exposure Notice
- Explosive Atmosphere
- Blasting or Construction Sites
- Hospitals
- Aircraft
- Driving
- In-vehicle use
- Personal Health and Safety
- Medical Implant Devices
- Hearing Devices
- Electrical Safety
- Li-ion secondary (rechargeable) battery notice
- Handling and Operating Conditions
- About the Dejero EnGo 260
- What’s included
- About Dejero Control
- Powering the EnGo
- Starting the EnGo
- Using the EnGo
- Connecting to the EnGo
- Inserting the EnGo into the backpack
- About the Preview screen
- Specifying the camera input type
- Changing SIM modules
- Configuring the EnGo
- Adjust the brightness display
- Configure the video input
- Configure the audio input
- Configure the video loss setting
- Configure the Live Resolution setting
- Configure the latency
- Configure Auto Start
- Configure the connection type
- Configure the connection settings
- Define the SIM set
- Activate the hotspot
- Rename the hotspot
- Change the hotspot password
- View devices connected to the hotspot
- Managing Wi-Fi connections
- Managing return feeds
- Managing SIM cards
- Transmitting live
- Using Store & Forward
- Transferring files
- About warning and error states
- Using the Remote Control
- Changing the display orientation
- Viewing connection information
- About stream indicators
- Troubleshooting
- Warning and error messages
- Technical specifications
- Additional help
- Document revision history
www.dejero.com
15 | Dejero EnGo 260 User Guide
Icon Description
Wi-Fi connection
Cellular connection
Note: If an icon appears in grey or if no bars appear, no connection is available. If a red X
appears with the icon, there is an error with the connection. For Wi-Fi and cellular
connections, the number of bars indicates the strength of the connection. For cellular
connections, an R indicates that you are roaming.
Specifying the camera input type
The EnGo is configured to detect the camera input automatically. After the camera is connected
and video appears on the Preview screen, use the Configuration screen to verify your
settings, if necessary. On this screen, you can check your video and video format type,
connection type, and latency settings.
1. On the Preview screen, tap .
2. Tap Settings.
3. Tap Input.
4. Tap Video Input.
5. Tap SDI, HDMI, or Auto.
For more information on the configuration settings, see page 16.
Changing SIM modules
The EnGo has a user-changeable SIM module for regional cellular network access. You can
access the SIM module to change the SIM cards to ones from a different region.
The SIM module uses nano SIM cards.