User's Guide

www.dejero.com
14 | Dejero EnGo 260 User Guide
• Live Menu: Use this menu to select the settings for your live transmission.
• Record Menu: Use this menu to set the quality of your Store & Forward clips.
Note: Your Control administrator must assign the transmitter to a receiver output
destination before you can use it to go live. If your administrator has not assigned the
transmitter, an error appears. Your administrator can also change the Store and Forward
Clip upload or File upload receiver destination using Control and the available quality
settings for clips. If any settings are not available, a message appears with the quality
setting in the Record Menu.
Change the settings for a live transmission
1. On the Preview screen, tap the Live Menu button.
2. Tap Feed, Auto, or User.
Live feed settings
Setting Description
Feed Use the Feed profile to send video to the station in poor network
conditions. You can also use Feed when you have time to send the
highest quality video or when recording live events without anchor desk
and reporter interaction.
Auto Use the Auto profile to adapt to network conditions. It increases latency
as needed.
User Use the User profile if you set the configuration options manually. For
more information, see Configuring the transmitter on page 16.
Set the quality of Store & Forward clips
1. On the Preview screen, tap the Record button.
2. Tap 2.5 Mb/s, 4.0 Mb/s, 6.0 Mb/s, 12.0 Mb/s, or 15.0 Mb/s.
Network connection icons
The following icons appear on the Preview screen to show the status of the EnGo’s
connections. The icons also appear on the screen when using Remote Control with the EnGo.
Icon Description
Ethernet connection
CellSat connection