Quick Guide

PRODUCT INTRODUCTION
Rear camera
Supports photographing and 1D/2D code quick scanning.
IC Card socket
Used for inserting the bank chip card.
Key Pad
Used for entering the password.
Power button
Short Press: Light the screen, lock the screen.
Long press: In shutdown state, long press 2-3 seconds to turn on;
When in use, press 2-3 seconds for a long time, and you can ch-
oose to turn off, turn on or screen capture.
In the crash state, press 10 seconds to restart automatically.
SD card slot (up)and Nano SIM card slot(down)
Used for inserting the SIM Card and SD Card.
Volume button
Adjust the volume instantly by pressing the button.
P-SAM card slot （up）and SIM card slot(down)
Used for inserting the P-SAM Card and SIM Card.
NFC reader
Used for sensing Quick Pass Card.
Magnetic card reader
Used for reading the information stored in the magnetic stripe
of bank card.
Printing instructions
Type-C USB
This device supports 58mm thermal paper with the specifications
of 57±0.5mmφ40mm.
Used for charging equipment.
Printer
① Open the paper container;
Used for charging equipment.
② Feed the paper correctly into the paper container in thedirec-
tion as shown, and pull some paper outside the cutter;
Indicator lamp
Close the cover of the paper container to finish printing paper
③
Used for indicating the steps for swiping card and charging state.
feeding.