Installation guide

www.clifford.com 33
➤➤
There is no activity for longer than 15 seconds.
➤➤
The Valet/Program switch is pressed too many times.
Feature Menus
The default settings are indicated in
bboolldd
type. Features that have additional settings that can be
programmed using the Bitwriter are indicated with an asterisk (*).
Feature Menu 1 - Basic Features
Feature Menu 2 - Advanced Features
Feature Number One-chirp setting Two-chirp setting
2-1 Siren output constant Siren output pulsed
2-2 30 second siren duration* 60 second siren duration*
2-3 False Alarm Control Technology ON False Alarm Control Technology OFF
2-4 Progressive door trigger Instant door trigger
2-5 Disarm from Valet, 1 pulse Disarm from Valet, 2-5 pulses
2-6 Door sensor bypass chirp ON Door sensor bypass chirp OFF
2-7 Ignition controlled domelight ON Ignition controlled domelight OFF
2-8 Single unlock pulse Double unlock pulse
2-9 Factory disarm with Channel 2 ON Factory disarm with Channel 2 OFF
2-10 Channel Four validity Channel Four: latched/latched, reset
with ignition/30-second timed/
second unlock output
Feature Number One-chirp setting Two-chirp setting
1-1 Active arming Passive arming
1-2 Arm/disarm chirps ON Arm/disarm chirps OFF
1-3 Ignition-controlled door locks* Standard door locks*
1-4 Active locking only Passive locking
1-5 Panic with ignition on No panic with ignition on
1-6 0.8 second door lock pulses 3.5 second door lock pulses
1-7 Forced passive arming ON Forced passive arming OFF
1-8 Automatic engine disable ON Automatic engine disable OFF
1-9 Armed When Driving (AWD) ON AWD OFF
1-10 Anti-Code Grabbing ON Anti-Code Grabbing OFF