Installation guide

© 2000 Directed Electronics, Inc. Vista, CA 25
NOTE: When connecting to the VATS wires, it is not important which wire is cut.
optional anti-grind relay
The optional anti-grind relay will prevent the starter from engaging if the ignition key is accidentally turned to
the start position during remote start operation. If the blue H2/1 status output has been programmed for factory
security re-arm, use the H2/2 blue/black third ignition output to control the relay.
Anti-grind can also be added by using a security system’s external, normally-closed starter kill. This is a quick
and easy way to add the anti-grind feature to the existing starter kill relay by using the H2/2 blue/black status wire.