Installation guide

© 2000 Directed Electronics, Inc. Vista, CA 23
Diagram B - Pre-1996 Dodge Dakota pickups with 2.5 liter motors:
1995 and newer vehicle anti-theft systems
(immobilizers)
1995 and newer vehicle anti-theft systems (immobilizers) require a bypass module. The bypass module allows for
easy interfacing, while still maintaining the OEM system’s integrity.
The Passlock I and Passlock II systems can be found in the following General Motors vehicles:
‘95 and newer Cavalier and Sunfire
‘96 and newer Achieva, Grand Am, and Skylark
‘97 and newer Intrigue, Malibu, and Cutlass
‘98 and newer trucks, vans, SUVs
‘99 and newer Alero
2000 and newer Impala and Saturn
Passlock I and II systems are VATS-evolved. Passlock systems still rely on the R-code to start, but the pellet is
no longer placed in the key. The resistor can now be found in the key switch. This allows for a greater number
of possible R-codes. In addition, Passlock systems require “seeing” the correct R-code at the correct time. To
bypass Passlock I and II, p/n 555L or p/n 555T is required.
passlock I and passlock II (PL-1 and PL-2)