Installation guide

3
©
1999 Directed Electronics, Inc.
What is Included
■ The control module
■ An XHF receiver/antenna
■ A pair of four-button transmitters
■ The red status LED indicator light
■ A push-button Valet
®
switch
■ Your warranty registration
■ Failsafe
®
Starter Kill Relay
■ A shut-down toggle switch
Important Information
Congratulations on the purchase of your remote start keyless entry
system. This system has been designed to provide years of trouble-
free operation. By carefully reading this owner's guide prior to
using your system, you will maximize the use of this system and
its features.
This system requires no specific maintenance. Your remotes are
powered by a miniature 3-volt battery, type 2032, that lasts
approximately one year under normal use. When the battery weakens,
the LED on the remote will dim and operating range will be reduced.
System Maintenance