Installation guide

© 2001 Directed Electronics, Inc. Vista, CA 7
operation settings learn routine
Many of the system features are programmable. The operation settings learn routine is used to access and
program the system features. You must have a programmed transmitter to program features.
To enter Learn Routine:
1. Arm the system.
2. Disarm the system.
3. Press and hold Buttons I and II on the transmitter until the unit generates a long chirp.
The long chirp is followed by a short chirp indicating feature one has been accessed in the
operation settings learn routine.
4. Release the transmitter buttons.
Repeat steps 3 and 4 to advance to the next feature. Each time you advance a feature, the feature number you
have accessed will be indicated by the number of short siren chirps.
5. Program the selected feature. Pressing Button I on the transmitter will select the one chirp
setting and the siren will chirp once. Pressing Button II on the transmitter will select the
two chirp setting and the siren will chirp twice. The default settings are indicated by bold
text in the table above.
ONE CHIRP - PRESS TWO CHIRPS - PRESS
FEATURE TRANSMITTER BUTTON I TRANSMITTER BUTTON II
1 - Current Sense ON OFF
2 - Current Sense Delay 5 Seconds 5 Minutes
3 - Audible Arm/Disarm Confirmation ON OFF
4 - Code-Hopping ON OFF
5 - Voice ON OFF
Default settings are indicated in bold text.